No ACL setup yet! Denying access to everyone.

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
public:gorev:changelog [2019/12/04 14:23]
chris
public:gorev:changelog [2020/07/07 09:33] (current)
beth.murphy [GoRev Version 2020.07.06| Date : 07/07/2020]
Line 1: Line 1:
 ===== GoRev Change Log ===== ===== GoRev Change Log =====
 Please see the sections below for more information about each version of GoRev and the included changes. Please see the sections below for more information about each version of GoRev and the included changes.
 +
 +===== GoRev Version 2020.07.06| Date  : 07/07/2020  =====
 +== GoRev ==
 +      - Feature: Digital registration forms now support drop down boxes
 +      - Feature: Added support for multi-line text fields in digital registration.
 +      - Feature: Added capture of drivers licenses and insurance cards via a patient’s mobile device camera 
 +      - Feature:[[public:gorev:changelog:2020.07.06 :Added Emergency Contact to the New Visit process.]]
 +      - Feature:[[public:gorev:changelog:2020.07.06 :Guarantor support has been added to the portal.  Guarantors can now register to see multiple patients within the portal]]
 +      - Change: [[public:gorev:changelog:2020.07.06 :Clients can now self service and obtain each of their locations portal pre-registration links]]
 +      - Change: [[public:gorev:changelog:2020.07.06 :Online Registrations and Recently Opened panes have swapped positions on the home page.]]
 +      - Change: [[public:gorev:changelog:2020.07.06 :Primary Care Physician can now be stored in demographics within Patient Overview.]]
 +      - Change: Added support for the arrow keys in the digital registration designer to position and resize the active control.
 +      - Change: Added additional text sizing modes to digital registration documents to support a wider range of situations.
 +      - Change: Added support for swapping the PDF in a form in the digital registration editor.
 +      - Change: Added expanded support for print services fields importing from digital registrations.
 +      - Change: SMS Text registration page lets you re-use the link and register again under a different email address.  The link should "expire" after use.
 +      - Bug Fix:CPT descriptions in the coding window were being populated solely based upon a CPT match into the charge master.  This caused the wrong descriptions to populate for items like J3490 where multiple CDM's use this particular CPT.   This logic was changed to pull from the charge master based on a CDM link.  This bug did not impact charge capture as all charging was based upon CDM links.
 +      - Bug Fix: The background can no longer be selected (turning the entire document blue) when signing a digital document.
 +      - Bug Fix: Fixed an issue with the WorkflowNotes flat data interface that causes it to fail when sending notifications to patients from a background maintenance task.
 +      - Bug Fix: Fixed an issue causing the "Portal Account Already Exists" notification to not show for users when using the Create Portal Account on Patient Overview.
 +      - New Report: [[public:gorev:changelog:2020.07.06 :Added the followup analysis report.  This report provides a summary statistical view of financials, number of actions, average number actions per visit by various GoRev status fields.]]
 +
 +===== GoRev Version 2020.06.18.2| Date  : 06/23/2020  =====
 +== GoRev ==
 +      - Feature: [[public:gorev:changelog:2020.06.18.2:Added Drivers License and Drivers License State to the contact section in Patient Overview]]
 +      - Feature: [[public:gorev:changelog:2020.06.18.2:Added new bulk action to allow users to disable patient billing.]] This de-approves all balances for selected visits and disables any queued statements. Users are required to have a new permission titled "BulkDisablePatientBilling" in order to use this functionality
 +      - Change: Removed default Patient Portal Notifications so that any event can be disabled by simply removing or not providing a template for the specific event.
 +      - Change: [[public:gorev:changelog:2020.06.18.2: Added Followup Status field to Visit section of Patient Overview]]
 +      - Change: The Demo bulk importer (Sqlinterface) now has the capability of importing the multivalue race field.
 +      - Change: Added support for additional state reporting requirements by allowing for custom profiles to be created to filter the data.
 +      - Bug Fix: Export to XLS and XLSX now support all column changes and filters that have been applied along with the existing row filter applied through filters or instant search
 +     
 +    
 +
 +===== GoRev Version 2020.06.05| Date  : 06/09/2020  =====
 +== GoRev ==
 +      - Feature:[[public:gorev:changelog:2020.06.05:SelfPayAutoBillPatient Selfpay Patient charges are automatically created when accounts reach Coding Complete when this registry key is enabled.]]
 +      - Change:[[public:gorev:changelog:2020.06.05:Added a registration packet system to allow for combining multiple digital registration items into a single registration packet to be completed by a patient.]]
 +      - Change:[[public:gorev:changelog:2020.06.05:Added support for taxonomy codes to be generated in CMS1500 box 33b.]]
 +      - Change: public:gorev:changelog:2020.06.05:Added a filter to treat UNKNOWN as no check number while importing EDI files into the posting workflow from the clearinghouse FTP.
 +      - Change:[[public:gorev:changelog:2020.06.05:Added a new Digital Registration Designer to allow for overlaying fields on top of PDF files. These documents can be printed as well as filled digitally via the GoRev Patient Portal.]]
 +      - Change:[[public:gorev:changelog:2020.06.05:Added a popup notification to the Register Portal Account screen to notify users if the patient already has a portal account.]]
 +      - Change:[[public:gorev:changelog:2020.06.05:Added support for attaching files from all visits when replying to a patient message from the portal.]]
 +      - Bug Fix: Fixed an issue causing Note Templates to not load when a bad permission record exists in the security tables.
 +      - Bug Fix: Fixed an issue with the Declined checkboxes relating to editing email addresses on Patient Overview.
 +      - Bug Fix: Fixed an issue when registering patients for Portal accounts by email.
 + 
 +
 +
 +===== GoRev Version 2020.05.18| Date  : 05/20/2020  =====
 +== GoRev ==
 +
 +      - Change:  [[public:gorev:changelog:2020.05.18:Modified the portal inbox UI to be more user friendly.]]
 +      - Change:  [[public:gorev:changelog:2020.05.18:Added default communication preferences to allow email communication for all categories.]]
 +      - Change:  [[public:gorev:changelog:2020.05.18: Added support for bulk printing labels from the reporting screen via Dymo label printers.]]
 +      - Change:  [[public:gorev:changelog:2020.05.18:Added a patient information box to the Patient Portal Inbox screen.]]
 +      - Change:  [[public:gorev:changelog:2020.05.18:Added an Account Notes tab to the Patient Portal Inbox screen.]]
 +      - Bug Fix: Fixed an issue causing the Edit Tests screen to not load the initially selected test when its first opened.
 +      - Bug Fix: Fixed an issue with the StatCheckIn permission on the Home screen.
 +      - Bug Fix: Fixed an issue causing the default value of NDC to be written to the NDC field of charges on the coding screen when no NDC is supplied.
 +      - Bug Fix: Fixed sorting and filtering issues on the Patient Overview, Patient Financials and Workflow screens.
 +      - Bug Fix: Fixed the Hold button issue on the Patient Portal Inbox screen.
 +      - Bug Fix: Fixed an issue on a few flat data interface components that causes data to not be imported when invoking from a remote API.
 +
 +===== GoRev Version 2020.05.01| Date  : 05/04/2020  =====
 +== GoRev ==
 +
 +      - Feature: [[public:gorev:changelog:2020.05.01: Added MRN as a field to the advanced search functionality.]]
 +      - Change: Added validation to the Statement Settings screen to prevent statement cycle periods less than 1.
 +      - Change: Added a checkbox to the various contact entry points in GoRev that marks email as Declined.
 +      - Change: Added a NoteCategory field to the WorkflowNotes flat data interface that allows notes to be delivered to patients on the Patient Portal..
 +      - Change: Added a new notification system that is able to deliver notifications to any allowed contact methods on a patient account using resource file templates.
 +      - Change: Added a print services based generic data merge process that can be used to generate notifications and other documents based on templates stored in Resource Files.
 +
 +
 +
 +===== GoRev Version 2020.04.23| Date  : 04/27/2020  =====
 +== GoRev ==
 +
 +      - Feature: [[public:gorev:changelog:20200423: Added minimum / maximum quantity settings to the charge master and restrict when charging.]]
 +      - Change: Added a system registry setting to control validation of NDC code formatting in claim generation. CGenValidateNdcFormat defaults to false.
 +      - Change: Added support to the VisitCharge interface to mapping charges directly against the Price table's NDC field and not through NdcToHcpcs.
 +      - Change: Added the BillStatus field to the demo interface.
 +      - Change: Added restrictions to the Carrier and Plan admin screens preventing changes to carriers or plans that are subscribed to another facility.
 +      - Change: Added support for carrier specific posting adjustment code rules. These rules take priority over adjustment code rules that apply to any carrier.
 +      - Change: Added registry settings allowing for disabling services for individual facilities within a shared GoRev server.
 +      - Fixed: verbiage on the Enable and Disable Patient Billing buttons on Patient Financials.
 +      - Bug Fix: The authorization management screen correctly displays. 
 +      - Bug Fix: Fixed an issue causing worksheets to not be editable from the Reporting screen when viewing the contents of a bucket (New, Complete, etc.) instead of viewing the All bucket.
 +
 +
 +
 +===== GoRev Version 2020.04.13| Date  : 04/14/2020  =====
 +== GoRev ==
 +
 +      - Feature: [[public:gorev:changelog:20200409:OffshoreFileRepo|Added support for encrypted offshore file repositories that automatically cache data on servers closer to workers so that they can work more efficiently.]]
 +      - Change: [[public:gorev:changelog:20200413:Bulk Posting is now required to start a new batch before posting.]]  
 +      - Change: [[public:gorev:changelog:20200409:Coding_Bucket|Coding Bucket - Claims failing to generate in production batches will now be moved to a new coding bucket BatchingError. This status will be included in future batches to allow these claims to retry generation automatically.]]
 +      - Change: [[public:gorev:changelog:20200409:Stat_checkin|stat checkin - Added support for doing Stat or Full Check in from Online Registrations on the home screen in the right click context menu.]]
 +      - Change: Added GurantorLastName as an available field in the statement generator. This field is linked with GuarantorName and will be either the guarantor information in GoRev or the patient information when the guarantor is not provided.
 +      - Change: [[public:gorev:changelog:20200409:FailedCharges|Add support for FailedCharge capture on the VisitCharge flat data interface. Require staff to review and correct these failed charges in the Coding screen.]]
 +      - Change: [[public:gorev:changelog:20200409:BatchErrorNote|Claim generation now notates directly onto the note feed any time a claim fails to generate and is moved to the Error coding bucket.]]
 +      - Bug Fix: Fixed an issue causing the Accept Assignment code settings on carriers and plans to not automatically sync to subscribed facilities.
 +      - Bug Fix: Fixed an issue causing charges that don't have revenue codes directly listed to not be able to be posted to within the line item posting module.
 +      - Bug Fix: Insurance information now populates when checking patients in from online portal registrations.
 +      - Bug Fix: Fixed an issue causing international addresses to fail to save.
 +      - Bug Fix: Fixed an issue causing various grids throughout GoRev to incorrectly color rows with data is sorted by clicking on a column header.
 +      - Bug Fix: Fixed an issue causing user performance data to export as a blank worksheet to Excel.
 +      - Bug Fix: Make active buttons in the Payer grid on the workflow form now work correctly.
 +      - Bug Fix: Fixed a visual issue with statement designs causing the upper elements to overlap the dotted "Cut here" line.
 +      - Bug Fix: Fixed an issue with data not loading properly on grid click in the following forms: Chargemaster, CarrierManagement, PlanManagement
 +      - Bug Fix: Fixed an issue with Waystar's version 2 API integrations (Pending resolution)
 +      - Bug Fix: Fixed an issue causing the workflow screen to not load when accounts have insurance with no carrier.
 +
 +
 +===== GoRev Version 2020.03.25| Date  : 03/31/2020  =====
 +== GoRev ==
 +
 +      - Feature: [[public:gorev:changelog:20200325:Dark Mode|Dark Mode - A 'Dark Mode' is now available for users. It can be found in the user dropdown. Marked as experimental for now.]]
 +      - Change: [[public:gorev:changelog:20200325:Print Services1|Print Services - Added Charge Physician to the itemized charge generation of Print Services.]]
 +      - Change: Increased the font size in the Bulk Posting, Line Item Posting and Report  View grids.
 +      - Change: Increased the font size on the comment feeds.
 +      - Change: Added a new Patient First Letter field to print services that can be utilized in place of the first name in layouts to prevent small text when patients have long names.
 +      - Bug Fix: Fixed an issue causing the change password panel to not become visible on the user preferences screen.
 +      - Bug Fix: Fixed an issue in the Posting Workflow Importer that caused incorrect PDF documents to be attached to electronic remits on inbound FTP workflow items.
 +
 +
 +===== GoRev Version 2020.03.16| Date  : 03/17/2020  =====
 +== GoRev ==
 +
 +      - Feature: [[public:gorev:changelog:20200312:resource_selection|Time Block - Resource selections on the TimeBlock creation form are no longer free-hand and must be selected manually]]
 +      - Feature: [[public:gorev:changelog:20200312:resource_Workflow1|Workflow - The CIGM data can now be seen in that Insurance Group tab is added to the Workflow Module]]
 +      - Feature: [[public:gorev:reportfilters|Report Filters - A new report filtering system exists that allows users to filter based on column(s) and make other report changes saving these to custom personal views]]
 +      - Change: [[public:gorev:changelog:20200312:resource_Scedule1|Schedule - Next/Previous appointment buttons have been modified to be semi-transparent, no longer obscuring appointment data.]]
 +      - Change: Notes between Professional and Institutional facilities can now be shown on both sides with a registry setting. "MasterFacility","ProFacility"
 +      - Change: [[public:gorev:changelog:20200312:resource_print services1|Print Services - Added in logging for print services and made the logs visible on the claim timeline.]]
 +      - Change: [[public:gorev:changelog:20200312:resource_Financial1|Financials - Added the patient name to the ribbon on the patient financials screen.]]
 +      - Change: [[public:gorev:changelog:20200312:resource_Batching1|Batching - Added the current payer sequence to the batch preview on the Batching screen.]]
 +      - Change: [[public:gorev:changelog:20200312:resource_Coding1|Coding - Made the coding screen automatically trim spaces from the DRG field.]]
 +      - Change: [[public:gorev:changelog:20200312:resource_Schedule2|Schedule - Diagnosis Codes now print when printing the Schedule in Scheduling.]]
 +      - Change: Time Block Added an automated PtResp writeoff process at a configurable statement cycle.
 +      - Change: Create central Waystar SFTP interaction point in ThunderPunch to allow for throttling of connections.
 +      - Change: Update Waystar web services integration for the upcoming changes.
 +      - Change: Added support for Posting Code Rules that allow for automating adjustment code changes on electronic remits.
 +      - Change: [[public:gorev:changelog:20200316:resource_workflow1|WorkFlow - Accounts opened in workflow will now populate in the "Recently Opened" grid on home.]]
 +      - Change: The coding screen's save logic has been altered to be more verbal about when data could not be saved due to an impassable error. These errors will need to be corrected immediately in order to save the coding data.
 +      - Bug Fix: Key presses on Reports no longer incorrectly modify the breadcrumb trail.
 +      - Bug Fix: Fixed an issue with Insurance Group Management causing local blank records to overshadow public records with valid data.
 +      - Bug Fix: [[public:gorev:changelog:20200312:Chargemaster1|Charge Master - Editing ChargeMaster no longer causes the entire grid to refresh, changes are affected on the row immediately. Added a manual refresh button. Notification window moved to be more subtle and out of the way.]]
 +
 +
 +===== GoRev Version 2020.02.19.1090| Date  : 02/20/2020  =====
 +== GoRev ==
 +
 +      - BugFix: Fixed a permissions issue allowing unintended access to Patient Financials.
 +      - BugFix: Fixed an issue with bar codes on patient labels printed via Dymo printers.
 +      - BugFix: Fixed an issue causing the banner on Home to continue showing "Login - GoRev" after automatically reconnecting due to a connection failure.
 +      - BugFix: Fixed an issue causing the MatchCarriersToPayers maintenance task to reprocess all insurance records due to rogue insurance records that had a blank financial class.
 +      - Feature:[[public:gorev:changelog:2019191090:enterpriseID|Patient Overview - Add Enterprise ID to the banner and title of Patient Overview and other patient screens.]]
 +      - Feature:[[public:gorev:changelog:2019191090:printservices|print services - Added Patient_Home_Phone_Work to print services.]]
 +      - Feature:[[public:gorev:changelog:2019191090:Barcodes|Barcodes - Added support for removing barcodes linked to charges in the charge master.]]
 +      - Change: Removed the legacy print services laboratory result data feed and replaced it with the visual result design-based generator. This will make custom printed documents and outbound HL7 feeds match more closely to the visual results generated by GoRev.
 +      - Change: Added >=, <= modifiers to the laboratory resulting module.
 +
 +===== GoRev Version 2020.02.05.1080| Date  : 02/05/2020  =====
 +== GoRev ==
 +
 +
 +      - Change: Added support for switching between SFTP clients via the ChSftpClient registry setting. Different clients will be used for compatibility with clearinghouse servers.
 +      - Change: Added the default location name to the banner on the home screen.
 +      - Change: Added an exclusion to a result hold rule (Result held for regeneration) when results are uploaded by users and not generated by GoRev.
 +      - Change: Added support for enabling the create appointment functionality on stat check in via the NewVisitShowAppointmentOnStatCheckIn registry key.
 +      - Change: Added support for Inpatient and Outpatient state reporting for the Oklahoma State Department of Health.
 +      - Change: Added support for custom report configuration sources and centralized management of reports.
 +      - Change: Added support for database synchronization tasks.
 +      - BugFix: Fixed an issue in reports where graphs from previous reports would remain visible when a report failed to execute on the server.
 +      - BugFix: Child accounts will no longer become stuck and unable to drop to a statement batch. Linked accounts will now queue the master account's MRN instead of the child account when operating in MRN level statement mode.
 +      - BugFix: Fixed a compatibility issue with the patient discharge emails interface.
 +      - BugFix: Fixed an issue with bar codes on patient labels printed via Dymo printers.
 +
 +
 +===== GoRev Version 2020.01.21.1072| Date  : 01/22/2020  =====
 +== GoRev ==
 +
 +     - BugFix: Fixed an issue preventing new insurance group information to be saved to CIGM.
 +     - BugFix: Fixed an issue causing carrier to not automatically fill in when searching for and selecting a plan to automatically enter insurance information.
 +     - BugFix: Fixed an issue causing HL7 Endpoints to be unable to deliver messages to XML interfaces on the server side.
 +
 +===== GoRev Version 2020.01.10.1069| Date  : 01/21/2020  =====
 +== GoRev ==
 +
 +     - Change: Follow Up Denial Management Features
 +     - Change: Added support for linking UPC and other external product barcodes to charges within the Chargemaster and to scan those product barcodes in Charging.
 +     - Bug Fix: The Follow Up Claim Timeline will no longer report the statement balance as rejected before it has been approved.
 +
 +
 +===== GoRev Version 2020.01.03.1064| Date  : 01/07/2020  =====
 +== GoRev ==
 +
 +     - Change: Added support for inserting additional templates into the statement designs at specified page numbers.
 +     - Change: Added support for XX3 claim type codes by utilizing an Interim Coding Approved status.
 +     - Change: Added the ability to bulk apply Follow Up Statuses from the Line Item and Bulk Posting screens.
 +     - Change: Added support for importing PDFs along side EDI files on the Waystar FTP when importing remits.
 +     - Change: Added a new report filter parameter type of Dropdown. This type supports a static list of choices that is configured in the parameter's Options array value.
 +     - Change: Removed the Insurance Balance restriction from the AdmitDate column on follow up reports. This will cause this column to appear for all views.
 +     - Change: Added the ability to alter extensions on uploaded files via the Rename function on Patient Overview.
 +     - Change: Removed local time zone translation from the GoRev client. All times will now be displayed in the facility's configured time zone.
 +     - Change: Added a VisitAdjustment flat data interface that allows for importing itemized adjustment codes onto payments.
 +     - Change: Added a VisitRemark flat data interface that allows for importing remark codes on payments.
 +     - Change: Added support for mapping linking payments to charges when importing payments via the Flat Data Interfaces.
 +     - Change: Added a registry setting (StatementAutoApprovalAdmitFloor) to allow for enabling statement auto approval only after a specified date.
 +     - Bug Fix: Print services will now return the child account's MRN when generating documents for accounts that have been linked.
  
  
Line 316: Line 528:
    -Feature: [[venture:change_log:20190410_Claim Generation|Claim Generation - added error check to prevent claim form dropping without an accept assignment code. Removed the default accept assignment code. ]]    -Feature: [[venture:change_log:20190410_Claim Generation|Claim Generation - added error check to prevent claim form dropping without an accept assignment code. Removed the default accept assignment code. ]]
    -Feature: [[venture:change_log:20190410_Lab|Lab - Added function to move an existing order to another visit on the lab order workflow screen. ]]    -Feature: [[venture:change_log:20190410_Lab|Lab - Added function to move an existing order to another visit on the lab order workflow screen. ]]
-   -Feature: [[venture:change_log:20190410_Lab|Lab - Added a LabMAXAutoDeliveryAge registry setting that defaults to 1. ]] 
-   -Feature: [[venture:change_log:20190410_SFAX|SFAX - Added a "canceled by user" status catch to the SFAX integration to abort the auto retry process. ]] 
    -Bug Fix: Fixed a false error when the "Seventh" Characters are involved in ICD10 validation.    -Bug Fix: Fixed a false error when the "Seventh" Characters are involved in ICD10 validation.
    -Bug Fix: Fixed an error in claim generation where it throws invalid adjustment balancing flags when one or more payments exists on an account.    -Bug Fix: Fixed an error in claim generation where it throws invalid adjustment balancing flags when one or more payments exists on an account.
Line 329: Line 539:
    -Change: Removed "State" when editing patient overview added an option to blank out the value to a drop down.    -Change: Removed "State" when editing patient overview added an option to blank out the value to a drop down.
    -Change: Changed Marketing tab to include fields of the employer info added a mapping to the marketing employer field when workers comp is not present.     -Change: Changed Marketing tab to include fields of the employer info added a mapping to the marketing employer field when workers comp is not present. 
-  +   -Change: Added a LabMAXAutoDeliveryAge registry setting that defaults to 1. 
 +   -Change: Added a "canceled by user" status catch to the SFAX integration to abort the auto retry process. ]]
 ===== GoRev Version 3.84.8| Date : 04/04/2019 ===== ===== GoRev Version 3.84.8| Date : 04/04/2019 =====
 == GoRev == == GoRev ==
Line 336: Line 546:
    -Feature: [[venture:change_log:20190404_Demographic|Demographic - added emergency contact relationship field to patient overview.]]    -Feature: [[venture:change_log:20190404_Demographic|Demographic - added emergency contact relationship field to patient overview.]]
    -Feature: [[venture:change_log:20190404_Lab|Lab - added a normal range field to the result details usable in result designs.]]    -Feature: [[venture:change_log:20190404_Lab|Lab - added a normal range field to the result details usable in result designs.]]
-   -Feature: [[venture:change_log:20190404_Insurance|Insurance - Added another restriction to financial class management to require that claim is fully processed and has an insurance balance of zero before moving to secondary.]] 
    -Bug Fix: Fixed an issue on coding screen that caused a the attending physician to overwrite providers tied directly to CPT codes.    -Bug Fix: Fixed an issue on coding screen that caused a the attending physician to overwrite providers tied directly to CPT codes.
    -Bug Fix: Fixed issue with international address not changing when box for international address is checked.    -Bug Fix: Fixed issue with international address not changing when box for international address is checked.
Line 344: Line 553:
    -Change: Optimized and improved speed for diagnosis and coding    -Change: Optimized and improved speed for diagnosis and coding
    -Change: GoRev now gives specific claim generation errors that occured    -Change: GoRev now gives specific claim generation errors that occured
 +   -Change: Added another restriction to financial class management to require that claim is fully processed and has an insurance balance of zero before moving to secondary.
  
 ===== GoRev Version 3.84.6| Date : 03/20/2019 ===== ===== GoRev Version 3.84.6| Date : 03/20/2019 =====
Line 498: Line 708:
    -Feature: [[venture:change_log:20180802_ClaimGeneration|Claim Generation - Added native support for service locations that differ from the billing provider.]]    -Feature: [[venture:change_log:20180802_ClaimGeneration|Claim Generation - Added native support for service locations that differ from the billing provider.]]
    -Feature: [[venture:change_log:20180802_Coding1|Coding - Added native support for tracking and billing occurrence codes.]]    -Feature: [[venture:change_log:20180802_Coding1|Coding - Added native support for tracking and billing occurrence codes.]]
-   -Feature: [[venture:change_log:20180802_UB04PaperClaims|UB04 Paper Claims - Added support for passing charge master descriptions through to the claim in place of the default revenue code descriptions.]] 
    -Feature: [[venture:change_log:20180802_LocationsPlansCarriers|Locations, Plans, Carriers - Added support for customizing ID qualifiers sent on claims.]]    -Feature: [[venture:change_log:20180802_LocationsPlansCarriers|Locations, Plans, Carriers - Added support for customizing ID qualifiers sent on claims.]]
    -Feature: [[venture:change_log:20180802_CarriersPlans|Carriers, Plans - Added support for secondary payer IDs.]]    -Feature: [[venture:change_log:20180802_CarriersPlans|Carriers, Plans - Added support for secondary payer IDs.]]
 +   -Change: UB04PaperClaims|UB04 Paper Claims - Added support for passing charge master descriptions through to the claim in place of the default revenue code descriptions.
  
  
Line 524: Line 734:
    -Bug Fix: Fixed an issue that was affecting scanning in GoRev.    -Bug Fix: Fixed an issue that was affecting scanning in GoRev.
    -Feature: [[venture:change_log:20180719_Lab1|Lab - GoRev will now automatically carry prescriptions and medical necessity diagnoses forward from the patient's previous order.]]    -Feature: [[venture:change_log:20180719_Lab1|Lab - GoRev will now automatically carry prescriptions and medical necessity diagnoses forward from the patient's previous order.]]
-   -Feature: [[venture:change_log:20180719_Lab2|Lab - Added the ability to manually override the default test sorting order in situations where alphabetical sorting is not desired.]] 
    -Feature: [[venture:change_log:20180719_LineItemPosting1|Line Item Posting - The Line Item Posting module now supports a validation suite as well as an error list to prevent common posting mistakes.]]    -Feature: [[venture:change_log:20180719_LineItemPosting1|Line Item Posting - The Line Item Posting module now supports a validation suite as well as an error list to prevent common posting mistakes.]]
-   -Feature: [[venture:change_log:20180719_RealTimeEligibility|Real Time Eligibility - GoRev will now automatically fall back to utilizing the GoRev eligibility viewer when Zirmed denies access to the graphical eligibility document.]] 
    -Feature: [[venture:change_log:20180719_ClaimGeneration|Claim Generation - Added a registry setting (CGenDoNotBillVisitStatuses) allowing  for the prevention of certain statuses from being billed.]]    -Feature: [[venture:change_log:20180719_ClaimGeneration|Claim Generation - Added a registry setting (CGenDoNotBillVisitStatuses) allowing  for the prevention of certain statuses from being billed.]]
    -Feature: [[venture:change_log:20180719_LineItemPosting2|Added a new posting validation system to the line item posting module that tracks balancing errors, duplicate checks and more.]]    -Feature: [[venture:change_log:20180719_LineItemPosting2|Added a new posting validation system to the line item posting module that tracks balancing errors, duplicate checks and more.]]
 +   -Change: Added the ability to manually override the default test sorting order in situations where alphabetical sorting is not desired.
 +   -Change: RealTimeEligibility|Real Time Eligibility - GoRev will now automatically fall back to utilizing the GoRev eligibility viewer when Zirmed denies access to the graphical eligibility document.
        
  
Line 547: Line 757:
    -Feature: [[venture:change_log:20180710_LineItemPosting|Line Item Posting - Changing the Facility, Account or Payer columns will synchronize to other rows on the current payment.]]    -Feature: [[venture:change_log:20180710_LineItemPosting|Line Item Posting - Changing the Facility, Account or Payer columns will synchronize to other rows on the current payment.]]
    -Feature: [[venture:change_log:20180710_Coding2|Coding - The coding grid now refreshes its data/row count when you save a coding case.]]    -Feature: [[venture:change_log:20180710_Coding2|Coding - The coding grid now refreshes its data/row count when you save a coding case.]]
-   -Feature: [[venture:change_log:20180710_ServerSupport|Added support for server wide Identity Providers that support configurable formatting options.]] 
    -Feature: [[venture:change_log:20180710_Lab|Lab - Added the ability to manually entered specimen IDs following a specified format.]]    -Feature: [[venture:change_log:20180710_Lab|Lab - Added the ability to manually entered specimen IDs following a specified format.]]
-   -Feature: [[venture:change_log:20180710_Billing|Added a new Period Description field for billing periods]] 
    -Feature: [[venture:change_log:20180710_Coding3|Coding - Added a coding ledger that details all coding from all visits for a patient.]]    -Feature: [[venture:change_log:20180710_Coding3|Coding - Added a coding ledger that details all coding from all visits for a patient.]]
    -Feature: [[venture:change_log:20180710_Users|Users - Multiple contact methods can now be selected.]]    -Feature: [[venture:change_log:20180710_Users|Users - Multiple contact methods can now be selected.]]
-   -Feature[[venture:change_log:20180710_AdvancedSearch|Enterprise IDs now synchronize to new patient registrations when a patient is registered through advanced search.]] +   -ChangeAdded a new Period Description field for billing periods 
-   -Feature[[venture:change_log:20180710_GlobalIdentityProviders|Global Identity Providers can now be used to generate "enterprise" IDs when checking in a new patient for the first time throughout a group.]] +   -Change: IDs now synchronize to new patient registrations when a patient is registered through advanced search. 
-   -Feature[[venture:change_log:20180710_Eligibility|Added a new eligibility printer that can be used in place of Zirmed's eligibility generator.]]+   -Change: Providers can now be used to generate "enterprise" IDs when checking in a new patient for the first time throughout a group. 
 +   -Change: Added a new eligibility printer that can be used in place of Zirmed's eligibility generator. 
 +   -Change: Added support for server wide Identity Providers that support configurable formatting options.
    -BugFix: Posting Preview - Fixed the batch total calculation bug.    -BugFix: Posting Preview - Fixed the batch total calculation bug.
    -BugFix: Posting (Line Item) - Fixed an issue that caused the payer information to be blank.    -BugFix: Posting (Line Item) - Fixed an issue that caused the payer information to be blank.
Line 571: Line 781:
 ===== GoRev Version 3.64.2| Date : 6/13/2018 ===== ===== GoRev Version 3.64.2| Date : 6/13/2018 =====
 == GoRev == == GoRev ==
 +   -Change: Added known categories to category selection drop downs that support free text instead of simple textboxes.
 +   -Change: Added a provider additional ID table for physicians and plans and allow for manually specifying multiple IDs for individual payers.
 +   -Change: Added a Referral Source display to the posting screen for the active account.
 +   -Change: Added the ability to set different units of measure on each clinical cutoff for a laboratory test.
 +   -Change: Add the ability to manually specify a medical record number when checking in a new patient.
 +   -Feature: [[venture:change_log:20180613_PatientOverview1|Patient Overview - Added quick searches to all address blocks]]
    -Feature: [[venture:change_log:20180613_Support|Support - Added a submit ticket button to the "We're here to help" form.]]    -Feature: [[venture:change_log:20180613_Support|Support - Added a submit ticket button to the "We're here to help" form.]]
    -Feature: [[venture:change_log:20180613_PrintForms|Print Forms - You can now re-categorize and re-name forms.]]    -Feature: [[venture:change_log:20180613_PrintForms|Print Forms - You can now re-categorize and re-name forms.]]
-   -Feature: [[venture:change_log:20180613_IDs|Added a provider additional ID table for physicians and plans and allow for manually specifying multiple IDs for individual payers.]] 
-   -Feature: [[venture:change_log:20180613_Posting|Added a Referral Source display to the posting screen for the active account.]] 
-   -Feature: [[venture:change_log:20180613_Lab|Lab - Added the ability to set different units of measure on each clinical cutoff for a laboratory test.]] 
-   -Feature: [[venture:change_log:20180613_PatientCheckIn|Add the ability to manually specify a medical record number when checking in a new patient.]] 
-   -Feature: [[venture:change_log:20180613_PatientOverview1|Patient Overview - Added quick searches to all address blocks]] 
-   -Feature: [[venture:change_log:20180613_PrintServices|Print Services - Added known categories to category selection drop downs that support free text instead of simple textboxes.]] 
    -Feature: [[venture:change_log:20180613_PatientOverview2|Patient Overview - Quick search added for editing payers.]]    -Feature: [[venture:change_log:20180613_PatientOverview2|Patient Overview - Quick search added for editing payers.]]
    -BugFix: New Physician Entry - Editing a physician will now correctly clear the 'Check All' check when opening the popup window. Previously the checkbox would be on but no locations would be selected.    -BugFix: New Physician Entry - Editing a physician will now correctly clear the 'Check All' check when opening the popup window. Previously the checkbox would be on but no locations would be selected.
Line 598: Line 808:
    -Feature: [[venture:change_log:20180603_CodingBuckets|CodingBuckets - Added counts to groups(green tiles) as well as favorites that corresponds to the "All" bucket inside.]]    -Feature: [[venture:change_log:20180603_CodingBuckets|CodingBuckets - Added counts to groups(green tiles) as well as favorites that corresponds to the "All" bucket inside.]]
    -Feature: [[venture:change_log:20180603_Posting|Added a new line item posting module to GoRev (beta)]]    -Feature: [[venture:change_log:20180603_Posting|Added a new line item posting module to GoRev (beta)]]
-   -Feature[[venture:change_log:20180603_Scheduling|Scheduling - Added a sysregistry setting to be used as the default coding status of newly created appointments.]] +   -Change: Added a sysregistry setting to be used as the default coding status of newly created appointments. 
-   -Feature[[venture:change_log:20180603_SystemRegistry|GoRev - Added a system registry setting: "NewVisitRequireGuarantorDoB" to remove the requirement for date of birth on guarantor saves.]] +   -Change: Added a system registry setting: "NewVisitRequireGuarantorDoB" to remove the requirement for date of birth on guarantor saves. 
-   -Feature[[venture:change_log:20180603_NewVisit|New Visit - Added a sysregistry key, "NewVisitWCEmployerRequired" to remove required employment fields on worker's comp panels.]]+   -Change: Added a sysregistry key, "NewVisitWCEmployerRequired" to remove required employment fields on worker's comp panels.
    -BugFix: Batching: Generating a batch with error rows and then uploading the acknowledgement no longer causes those error rows to no longer be loaded by batching    -BugFix: Batching: Generating a batch with error rows and then uploading the acknowledgement no longer causes those error rows to no longer be loaded by batching
    -BugFix: Plan Management - Plan information will no longer clear after saving changes.    -BugFix: Plan Management - Plan information will no longer clear after saving changes.
Line 608: Line 818:
 ===== GoRev Version 3.62.2| Date : 5/23/2018 ===== ===== GoRev Version 3.62.2| Date : 5/23/2018 =====
 == GoRev == == GoRev ==
-   -Feature: [[venture:change_log:20180523_NewVisit1|New Visit - Added a registry key to automatically import the attending or referring physician from the previous visit when entering a new case.]] 
    -Feature: [[venture:change_log:20180523_Coding|Added an insurance tab with a payer grid to the coding screen.]]    -Feature: [[venture:change_log:20180523_Coding|Added an insurance tab with a payer grid to the coding screen.]]
    -Feature: [[venture:change_log:20180523_PatientOverviewWorkflow|Added a Collections Status field to patient accounts. This parameter is editable on Patient Overview and Workflow.]]    -Feature: [[venture:change_log:20180523_PatientOverviewWorkflow|Added a Collections Status field to patient accounts. This parameter is editable on Patient Overview and Workflow.]]
Line 618: Line 827:
    -Feature: [[venture:change_log:20180523_GlobalRegistryKey|Added the ability to disable the ticket system via a global registry key: "DisableTicketSystem". Use permission "SupportAccess" to bypass this.]]    -Feature: [[venture:change_log:20180523_GlobalRegistryKey|Added the ability to disable the ticket system via a global registry key: "DisableTicketSystem". Use permission "SupportAccess" to bypass this.]]
    -Change: Removed permission restricting access to PDF Tools    -Change: Removed permission restricting access to PDF Tools
 +   -Change: Added a registry key to automatically import the attending or referring physician from the previous visit when entering a new case.
    -Change: Added a default blank service type option for situations where an uncommon service is performed and does not require an individualized service type.    -Change: Added a default blank service type option for situations where an uncommon service is performed and does not require an individualized service type.
    -Change: Scheduling - Page Width setting now behaves differently depending on if Landscape is selected or not.  Tooltip and information button added to explain this to users.    -Change: Scheduling - Page Width setting now behaves differently depending on if Landscape is selected or not.  Tooltip and information button added to explain this to users.
Line 630: Line 840:
 ===== GoRev Version 3.60.0| Date : 5/13/2018 ===== ===== GoRev Version 3.60.0| Date : 5/13/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180513_ClaimGeneration1|Claim Generation - Added support for sending additional billing notes on claims electronically via loop 2300 segment NTE as well as on paper claims in CMS 1500 box 19.]] +   -ChangeAdded a registry setting to disable the insured date of birth field requirement. 
-   -Feature[[venture:change_log:20180513_ClaimGeneration2|Claim Generation - Added the ability to hold claims based on the attending or referring providers on the case.]]+   -Change: Added support for sending additional billing notes on claims electronically via loop 2300 segment NTE as well as on paper claims in CMS 1500 box 19. 
 +   -Change: Added the ability to hold claims based on the attending or referring providers on the case.
    -Feature: [[venture:change_log:20180513_Anesthesia|Anesthesia - Added a free form Anesthesia Type field to allow for custom values to come across the interface and then be classified as monitored or unmonitored anesthesia care.]]    -Feature: [[venture:change_log:20180513_Anesthesia|Anesthesia - Added a free form Anesthesia Type field to allow for custom values to come across the interface and then be classified as monitored or unmonitored anesthesia care.]]
    -Feature: [[venture:change_log:20180513_FlatDataInterfaces|Flat Data Interfaces - Added the ability to disable validation on inbound data.]]    -Feature: [[venture:change_log:20180513_FlatDataInterfaces|Flat Data Interfaces - Added the ability to disable validation on inbound data.]]
-   -Feature: [[venture:change_log:20180513_InsuranceValidation|Insurance Validation - Added a registry setting to disable the insured date of birth field requirement.]]+
  
 ===== GoRev Version 3.59.0| Date : 5/8/2018 ===== ===== GoRev Version 3.59.0| Date : 5/8/2018 =====
Line 645: Line 856:
    -Feature: [[venture:change_log:20180508_SchedulingPrintTemplates4|Scheduling - Time will now be displayed in Time Block subjects.]]    -Feature: [[venture:change_log:20180508_SchedulingPrintTemplates4|Scheduling - Time will now be displayed in Time Block subjects.]]
    -Feature: [[venture:change_log:20180508_SchedulingPrintTemplates5|Scheduling - Added page width setting for print templates.]]    -Feature: [[venture:change_log:20180508_SchedulingPrintTemplates5|Scheduling - Added page width setting for print templates.]]
-   -Feature: [[venture:change_log:20180508_Locations|Added a new Interchange Version field to the Location Directory that allows for billing different claim types by location.]] 
-   -Feature: [[venture:change_log:20180508_PrintServices1|Print Services - Added the ability to generate CMS 1500 professional claims to paper on demand.]] 
-   -Feature: [[venture:change_log:20180508_PrintServices2|Print Services - Added CIGM plan information fields to print services.]] 
    -Feature: [[venture:change_log:20180508_LabQualityControl|Lab Quality Control - Added the ability to hide tests from appearing in the quality control module.]]    -Feature: [[venture:change_log:20180508_LabQualityControl|Lab Quality Control - Added the ability to hide tests from appearing in the quality control module.]]
 +   -Feature: [[venture:change_log:20180508_PrintServices1|Print Services - Added the ability to generate CMS 1500 professional claims to paper on demand.]]
 +   -Change: Added CIGM plan information fields to print services.
 +   -Change: Added a new Interchange Version field to the Location Directory that allows for billing different claim types by location.
    -BugFix: PDF Tools - "Add all documents" button when merging files now works correctly and no longer produces an unhandled exception.    -BugFix: PDF Tools - "Add all documents" button when merging files now works correctly and no longer produces an unhandled exception.
    -BugFix: PDF Tools - The tab order on popup windows now behave in a more efficient way.    -BugFix: PDF Tools - The tab order on popup windows now behave in a more efficient way.
Line 666: Line 877:
 == Interfacing == == Interfacing ==
    -Feature: [[venture:change_log:20180508_ClaimGeneration|Claim Generation - Added a configurable function that can automatically move claims when batches are generated. See registry setting CgenSetCodingStatus.]]    -Feature: [[venture:change_log:20180508_ClaimGeneration|Claim Generation - Added a configurable function that can automatically move claims when batches are generated. See registry setting CgenSetCodingStatus.]]
-   -Feature: [[venture:change_log:20180508_FlatDataInterfacing1|Flat Data Interfacing - Added the ability to decompress password protected zip archives while import flat data into GoRev.]] 
-   -Feature: [[venture:change_log:20180508_Security|Security - Added PGP cryptography support to the clearinghouse modules.]] 
-   -Feature: [[venture:change_log:20180508_FlatDataInterfacing2|Flat Data Interfacing - Added PlaceOfServiceCode and BNPI fields to the Location interface.]] 
-   -Feature: [[venture:change_log:20180508_Integration|Integration - Added support for the Emdeon clearinghouse.]] 
    -Feature: [[venture:change_log:20180508_RegistrySetting|Added in a registry setting (CgenOrderServiceLinesByValue) to support sorting claim charge lines by charge amount descending.]]    -Feature: [[venture:change_log:20180508_RegistrySetting|Added in a registry setting (CgenOrderServiceLinesByValue) to support sorting claim charge lines by charge amount descending.]]
 +   -Change: Added the ability to decompress password protected zip archives while import flat data into GoRev.
 +   -Change: Added PGP cryptography support to the clearinghouse modules.
 +   -Change: Added PlaceOfServiceCode and BNPI fields to the Location interface.
 +   -Change: Added support for the Emdeon clearinghouse.
 +
  
 ===== GoRev Version 3.58.0| Date : 3/27/2018 ===== ===== GoRev Version 3.58.0| Date : 3/27/2018 =====
Line 703: Line 915:
    -Feature: [[venture:change_log:20180412_UserPreferences|User Preferences-added Default facility user setting]]    -Feature: [[venture:change_log:20180412_UserPreferences|User Preferences-added Default facility user setting]]
    -Feature: [[venture:change_log:20180412_GoRevUI|Added the ability to undo an account merge via the GoRev UI.]]    -Feature: [[venture:change_log:20180412_GoRevUI|Added the ability to undo an account merge via the GoRev UI.]]
-   -Feature[[venture:change_log:20180412_Interfaces|Added the ability to filter outbound interfaces by carrier.]] +   -Change: Added the ability to filter outbound interfaces by carrier. 
-   -Feature: [[venture:change_log:20180412_DoctorTable|Added additional fields to the doctor table and support for mapping doctors from external systems.]]+   -Change: Added additional fields to the doctor table and support for mapping doctors from external systems.
    -BugFix: Charge Master: Added a visual cue to let the user know that the charge master is loading.    -BugFix: Charge Master: Added a visual cue to let the user know that the charge master is loading.
    -Ticket #9539 New Users for SFTP    -Ticket #9539 New Users for SFTP
Line 715: Line 927:
    -Feature: [[venture:change_log:20180327_Scheduling2|Scheduling - Dragging and dropping appointments has a success notification now.]]    -Feature: [[venture:change_log:20180327_Scheduling2|Scheduling - Dragging and dropping appointments has a success notification now.]]
    -Feature: [[venture:change_log:20180327_Scheduling3|Scheduling - Outstanding patient balance added to the print templates.]]    -Feature: [[venture:change_log:20180327_Scheduling3|Scheduling - Outstanding patient balance added to the print templates.]]
-   -Feature[[venture:change_log:20180327_CarrierManagement|Carrier Management - Added the ability to block modifiers from claims on a carrier by carrier basis.]] +   -Change: Added the ability to block modifiers from claims on a carrier by carrier basis. 
-   -Feature[[venture:change_log:20180327_ClaimGeneration|Claim Generation - Added the ability to hold claims by date of service until each service date is approved.]]+   -Change: Added the ability to hold claims by date of service until each service date is approved.
    -Change: (Ticket #9526) - The unit field in the Coding module now selects the contents when it receives focus.    -Change: (Ticket #9526) - The unit field in the Coding module now selects the contents when it receives focus.
    -BugFix: Lab Orders - Sort prescribed medications on edit lab order screen.    -BugFix: Lab Orders - Sort prescribed medications on edit lab order screen.
Line 729: Line 941:
 ===== GoRev Version 3.55.0| Date : 3/13/2018 ===== ===== GoRev Version 3.55.0| Date : 3/13/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180313_PrintServices1|Print services - Added a latest note section of fields.]] +   -Change: Added a latest note section of fields. 
-   -Feature[[venture:change_log:20180313_Coding|Coding - Added a new field to track the E&M Level directly on each coding record for use in reports.]] +   -Change: Added a new field to track the E&M Level directly on each coding record for use in reports.]] 
-   -Feature[[venture:change_log:20180313_BalanceReporting|Balance Reporting - Added an additional field to track the current statement balance for each visit.]]+   -Change: Added an additional field to track the current statement balance for each visit.]]
    -Change: New Visit - Date of service validation can now be controlled by the DateOfServiceMaxAge system registry setting.    -Change: New Visit - Date of service validation can now be controlled by the DateOfServiceMaxAge system registry setting.
  
Line 737: Line 949:
    -Feature: [[venture:change_log:20180313_LabOrders|Lab Orders - Added a new order preview field (SCV) to LabOrder based on ordered tests.]]    -Feature: [[venture:change_log:20180313_LabOrders|Lab Orders - Added a new order preview field (SCV) to LabOrder based on ordered tests.]]
    -Feature: [[venture:change_log:20180313_QualityControl|Quality Control - Added the ability to export the tabular data grid to various spreadsheet formats.]]    -Feature: [[venture:change_log:20180313_QualityControl|Quality Control - Added the ability to export the tabular data grid to various spreadsheet formats.]]
-   -Feature [[venture:change_log:20180313_LabTrayBatchCreator|Lab Tray Batch Creator - Added columns to display the specimen type, testing type and ordered profile.]] +   -Feature:  [[venture:change_log:20180313_LabTrayBatchCreator|Lab Tray Batch Creator - Added columns to display the specimen type, testing type and ordered profile.]] 
-   -Feature - [[venture:change_log:20180313_PrintServices2|Print Services - Add Order Preview and Result Preview (SCV) fields to print services for use in labels and other documents.]] +   -Change: Add Order Preview and Result Preview (SCV) fields to print services for use in labels and other documents. 
-   -Feature[[venture:change_log:20180313_EditLabResults|Edit Lab Results - Applied the same logic to the result grid that is applied to clinical results to give a better preview of what the final results will contain.]]+   -Change: Applied the same logic to the result grid that is applied to clinical results to give a better preview of what the final results will contain.
    -Change: Lab Results - Added additional checks to prevent users from manually changing lab results in the GoRev UI when the registry key LabBlockResultUpdatesForApprovedSamples is enabled.    -Change: Lab Results - Added additional checks to prevent users from manually changing lab results in the GoRev UI when the registry key LabBlockResultUpdatesForApprovedSamples is enabled.
  
 == Interfacing == == Interfacing ==
-   -Feature[[venture:change_log:20180313_HL7Interfacing|HL7 Interfacing - Added the ability send Last and First name merged (comma separated) in one field.]]+   -Change: Added the ability send Last and First name merged (comma separated) in one field.
  
 == GoRev Updater == == GoRev Updater ==
Line 770: Line 982:
    -Feature: [[venture:change_log:20180227_Scheduling1|Scheduling - Time blocks now have a delete option in the right click menu]]    -Feature: [[venture:change_log:20180227_Scheduling1|Scheduling - Time blocks now have a delete option in the right click menu]]
    -Feature: [[venture:change_log:20180227_Scheduling2|Scheduling - Time blocks will now pull up an 'edit block' window instead of the edit appointment window. Allowing the user to change times/descriptions.]]    -Feature: [[venture:change_log:20180227_Scheduling2|Scheduling - Time blocks will now pull up an 'edit block' window instead of the edit appointment window. Allowing the user to change times/descriptions.]]
-   -Feature: [[venture:change_log:20180227_Scheduling3|Scheduling - Charges entered in the scheduling module are now designated 'Pending' until shortly after the admission date, upon which they are converted to real charges.]] 
    -Feature: [[venture:change_log:20180227_CLaimGeneration|Claim Generation - Added support for manually specifying units of measure on individual charge master entries.]]    -Feature: [[venture:change_log:20180227_CLaimGeneration|Claim Generation - Added support for manually specifying units of measure on individual charge master entries.]]
    -Feature: [[venture:change_log:20180227_Anesthesia|Added a new Anesthesia Module]]    -Feature: [[venture:change_log:20180227_Anesthesia|Added a new Anesthesia Module]]
-   -Feature: [[venture:change_log:20180227_ReportScheduling|Scheduled report emails now redirect to a new View Report page instead of downloading directly.]] 
    -Feature: [[venture:change_log:20180227_NewVisit|New Visit - Added group management links to the insurance areas of new visit.]]    -Feature: [[venture:change_log:20180227_NewVisit|New Visit - Added group management links to the insurance areas of new visit.]]
 +   -Change: Scheduled report emails now redirect to a new View Report page instead of downloading directly.
 +   -Change: Charges entered in the scheduling module are now designated 'Pending' until shortly after the admission date, upon which they are converted to real charges.
    -Cosmetic: Scheduling - Many old icons were changed to use standard GoRev Icons.    -Cosmetic: Scheduling - Many old icons were changed to use standard GoRev Icons.
    -BugFix: Location Directory - Lab tab now shows for all location types.    -BugFix: Location Directory - Lab tab now shows for all location types.
Line 787: Line 999:
  
 == Interfacing == == Interfacing ==
-   -Feature[[venture:change_log:20180227_Interfacing|Interfacing - Added a new MVA Info Flat Data Interface.]]+   -Change: Added a new MVA Info Flat Data Interface.
    -BugFix: FileNameFilter in PullSftpFileSystem interface now works correctly.    -BugFix: FileNameFilter in PullSftpFileSystem interface now works correctly.
  
 ===== GoRev Version 3.52.0| Date : 2/7/2018 ===== ===== GoRev Version 3.52.0| Date : 2/7/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180207_Grades|Grades - Added a setting that  allows you to show/hide facilities rather than trying automatically abstract that information.]] +   -Change: Added the ability to create worksheets that are not directly tied to patient accounts.]] 
-   -Feature[[venture:change_log:20180207_GoRevOnline|GoRev Online - Custom maintenance page.]] +   -Change: GoRev Online - Custom maintenance page.]] 
-   -Feature[[venture:change_log:20180207_InsuranceGroupManagement|GoRev - Added a new Insurance Group Management module]] +   -Change: Added a new Insurance Group Management module]] 
-   -Feature[[venture:change_log:20180702_PatientStatements|Patient Statements - Added support for individual tracking of statement cycles to each visit. Replaced legacy notation maintenance based on MRN level statement tracking with immediate notation by the statement generator.]] +   -Change: Added support for individual tracking of statement cycles to each visit. Replaced legacy notation maintenance based on MRN level statement tracking with immediate notation by the statement generator.]] 
-   -Feature[[venture:change_log:20180207_Web|Web - You can now submit tickets online via the web portal]]+   -Change: You can now submit tickets online via the web portal
    -Feature: [[venture:change_log:20180207_Admin|Admin - Added the ability to edit global system registry settings from the GoRev UI.]]    -Feature: [[venture:change_log:20180207_Admin|Admin - Added the ability to edit global system registry settings from the GoRev UI.]]
    -Feature: [[venture:change_log:20180207_Scheduling|Scheduling - Added a cancellation reason system for better appointment tracking/reports.]]    -Feature: [[venture:change_log:20180207_Scheduling|Scheduling - Added a cancellation reason system for better appointment tracking/reports.]]
-   -Feature: [[venture:change_log:20180207_Worksheets|Worksheets - Added the ability to create worksheets that are not directly tied to patient accounts.]]+   -Feature: [[venture:change_log:20180207_Grades|Grades - Added a setting that  allows you to show/hide facilities rather than trying automatically abstract that information.]] 
    -BugFix: Server - Lookups can now be saved with null required permissions    -BugFix: Server - Lookups can now be saved with null required permissions
    -BugFix: File System Extenders - Remote files are no longer left in a locked state immediately after being uploaded.    -BugFix: File System Extenders - Remote files are no longer left in a locked state immediately after being uploaded.
Line 811: Line 1024:
  
    -Feature: [[venture:change_log:20180125_Scheduling1|Scheduling - Rooms can now be tied to a default place of service.]]    -Feature: [[venture:change_log:20180125_Scheduling1|Scheduling - Rooms can now be tied to a default place of service.]]
-   -Feature: [[venture:change_log:20180125_Posting|Posting (Ticket 7470) - Added the ability to bulk set the coding status on all accounts in the current batch.]] 
    -Feature: [[venture:change_log:20180125_Scheduling2|Scheduling - Added place of service to the edit_appointment screen.]]    -Feature: [[venture:change_log:20180125_Scheduling2|Scheduling - Added place of service to the edit_appointment screen.]]
-   -Feature[[venture:change_log:20180125_LabQualityControl|Lab Quality Control - Added +/-20% guide lines to the percentage deviation graph types.]]+   -ChangeAdded the ability to bulk set the coding status on all accounts in the current batch. 
 +   -Change: Added +/-20% guide lines to the percentage deviation graph types.
    -Change: Renamed and swapped icons for the "Upload Document" button on home. It is now labeled "Add Posting Document".    -Change: Renamed and swapped icons for the "Upload Document" button on home. It is now labeled "Add Posting Document".
    -Change: Posting - (Ticket 7429) Altered the transaction view on posting to reflect all fields displayed on patient financials.    -Change: Posting - (Ticket 7429) Altered the transaction view on posting to reflect all fields displayed on patient financials.
Line 832: Line 1045:
 == API and Administration == == API and Administration ==
    -BugFix: VisitCharge Interface - Unbillable charge items are now saved to the appropriate table when charges are imported over an interface.    -BugFix: VisitCharge Interface - Unbillable charge items are now saved to the appropriate table when charges are imported over an interface.
-   -Feature[[venture:change_log:20180125_FlatDataInterfacing|Integrated the flat data interfacing system into the worksheets system to allow direction of data on save.]]+   -Change: Integrated the flat data interfacing system into the worksheets system to allow direction of data on save.
    -BugFix: GoWatch - Archived data is now successfully trimmed from the database.    -BugFix: GoWatch - Archived data is now successfully trimmed from the database.
  
 ===== GoRev Version 3.50.0| Date : 1/16/2018 ===== ===== GoRev Version 3.50.0| Date : 1/16/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180116_Scheduling|Scheduling - Additional Notes can now be added to print templates.]] +   -Change: Additional Notes can now be added to print templates. 
-   -Feature: [[venture:change_log:20180116_GlobalSettings|Added global settings that can be used to customize the password policy in effect for a GoRev server.]]+   -Change: Added global settings that can be used to customize the password policy in effect for a GoRev server.
    -Change: Scheduling - verbiage changed on the edit_appointment screen to better describe the patient's balance.    -Change: Scheduling - verbiage changed on the edit_appointment screen to better describe the patient's balance.
    -Change: Changed password storage and generation methods to be in line with SOC-2 compliant practices.    -Change: Changed password storage and generation methods to be in line with SOC-2 compliant practices.
Line 864: Line 1077:
 ===== GoRev Version 3.49.0| Date : 1/8/2018 ===== ===== GoRev Version 3.49.0| Date : 1/8/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180108_NewVisitStatCheckIn|Added Referral Source to New Visit and Stat Check-In.]] +   -Change: Added Referral Source to New Visit and Stat Check-In. 
-   -Feature: [[venture:change_log:20180108_GoRevFileSystemExtender|Added additional functionality to the GoRevFileSystemExtender to support retrieving complete file listings from other GoRev servers as well as the ability to configure them while the server is running.]]+   -Change: Added additional functionality to the GoRevFileSystemExtender to support retrieving complete file listings from other GoRev servers as well as the ability to configure them while the server is running.
    -Change: Created a new reports delivery secure web page that requires the user to log in and allows direct download of report data.    -Change: Created a new reports delivery secure web page that requires the user to log in and allows direct download of report data.
    -Change: Created a new report scheduling screen adding additional functionality and fixing multiple issues.    -Change: Created a new report scheduling screen adding additional functionality and fixing multiple issues.
Line 880: Line 1093:
 ===== GoRev Version 3.48.4| Date : 1/5/2018 ===== ===== GoRev Version 3.48.4| Date : 1/5/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180105_FileSystemExtender|Added support for FileSystemExtenders to automatically retrieve file lists from the referenced server.]] +   -Change: Added support for FileSystemExtenders to automatically retrieve file lists from the referenced server. 
-   -Feature[[venture:change_log:20180105_Workflow|Added additional workflow module modes for Zero Balance Accounts and All Accounts.]] +   -Change: Added additional workflow module modes for Zero Balance Accounts and All Accounts. 
-   -Feature[[venture:change_log:20180105_LabResults|Lab Results - Added two additional clinical statuses (Low and High). These statuses have default descriptions of Out of Range.]] +   -Change: Lab Results - Added two additional clinical statuses (Low and High). These statuses have default descriptions of Out of Range. 
-   -Feature: [[venture:change_log:20180105_LabResultDesign|Lab Result Design - Added the ability to have custom positive/negative/detected/range verbiages.]]+   -Change: Lab Result Design - Added the ability to have custom positive/negative/detected/range verbiages.
    -BugFix: Saving phone numbers from scheduling no longer duplicates contact records causing unpredictable behavior.    -BugFix: Saving phone numbers from scheduling no longer duplicates contact records causing unpredictable behavior.
    -BugFix: Lab result PDF merge returns the wrong data type in the server.    -BugFix: Lab result PDF merge returns the wrong data type in the server.
Line 892: Line 1105:
 ===== GoRev Version 3.48.0| Date : 1/1/2018 ===== ===== GoRev Version 3.48.0| Date : 1/1/2018 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20180101_GoRevServerPropagation|GoRev Server Propagation - Added functionality to support gateways in the GoRev Server Config CodeMaster table for propagation.]]+   -Change: Added functionality to support gateways in the GoRev Server Config CodeMaster table for propagation.]]
    -Optimization: Server Selection - Optimized the initial server load process to prevent long waits due to offline or permanently disabled servers in the choice list.    -Optimization: Server Selection - Optimized the initial server load process to prevent long waits due to offline or permanently disabled servers in the choice list.
    -BugFix: Added CodingLog activity tracking to the DefaultClaimAcknowledgementProcessor.    -BugFix: Added CodingLog activity tracking to the DefaultClaimAcknowledgementProcessor.
Line 905: Line 1118:
 ===== Version 3.47.0| Date : 12/19/2017 ===== ===== Version 3.47.0| Date : 12/19/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171219_LabResultPortal|Lab Result Portal - The result portal will now stitch third party results into PDFs delivered to lab clients.]]+   -Change: The result portal will now stitch third party results into PDFs delivered to lab clients.
    -Feature: [[venture:change_log:20171219_Locations|Locations - The location form has been revamped to follow GoRev best practices and visual guidelines.]]    -Feature: [[venture:change_log:20171219_Locations|Locations - The location form has been revamped to follow GoRev best practices and visual guidelines.]]
    -Bug Fix: Coding - Fixed an issue causing the coding buckets to fail to generate due to reporting path conflicts.    -Bug Fix: Coding - Fixed an issue causing the coding buckets to fail to generate due to reporting path conflicts.
Line 918: Line 1131:
 ===== Version 3.46.0| Date : 12/18/2017 ===== ===== Version 3.46.0| Date : 12/18/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171218_Lab1|Lab - Added a new registry setting to be used when there is not a design specified on the location.]] +   -Change: Added a new registry setting to be used when there is not a design specified on the location. 
-   -Feature[[venture:change_log:20171218_Lab2|Lab - Automatic result certification process for lab results that are expected.]]+   -Change: Automatic result certification process for lab results that are expected.
    -Bug Fix: Grades - Grades no longer average facilities that have no grades.    -Bug Fix: Grades - Grades no longer average facilities that have no grades.
    -Bug Fix: Posting - Corrected a labeling issue that incorrectly displayed both expected values and actual values headers as "expected".    -Bug Fix: Posting - Corrected a labeling issue that incorrectly displayed both expected values and actual values headers as "expected".
Line 932: Line 1145:
 ===== Version 3.45.0| Date : 12/12/2017 ===== ===== Version 3.45.0| Date : 12/12/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171212_Lab|Lab - Added support for cross facility specimens to the Lab Tray Batch Creator.]] +   -Change: Added support for cross facility specimens to the Lab Tray Batch Creator. 
-   -Feature[[venture:change_log:20171212_PatientOverview|Patient Overview - Added system registry settings to allow disabling of the Quick Fill Insurance functionality.]]+   -Change: Added system registry settings to allow disabling of the Quick Fill Insurance functionality.
    -Bug Fix: Grades - Facilities are no longer visible if they have no grades.    -Bug Fix: Grades - Facilities are no longer visible if they have no grades.
    -Bug Fix: Reports - GoRev is now able to export reports with columns that have duplicate names.    -Bug Fix: Reports - GoRev is now able to export reports with columns that have duplicate names.
Line 941: Line 1154:
 == API and Administration == == API and Administration ==
    -Feature: [[venture:change_log:20171212_Reports1|Reports- Added Gzip compression to the SimpleQuery data type to improve read/write speed and reduce disk usage.]]    -Feature: [[venture:change_log:20171212_Reports1|Reports- Added Gzip compression to the SimpleQuery data type to improve read/write speed and reduce disk usage.]]
-   -Feature[[venture:change_log:20171212_Reports2|Reports - Added the ability to have multiple nested tiers on a report.]] +   -Change: Added the ability to have multiple nested tiers on a report. 
-   -Feature[[venture:change_log:20171212_Reports3|Reports - Added multiple features to the GoRev Report designer.]] +   -Change: Added multiple features to the GoRev Report designer. 
-   -Feature[[venture:change_log:20171212_Reports4|Reports - Added an API bypass to return SimpleQuery zipped caches directly to the GoRev Client]]+   -Change: Added an API bypass to return SimpleQuery zipped caches directly to the GoRev Client
    -Change: Grades - Grades now load via the report configuration functionality.    -Change: Grades - Grades now load via the report configuration functionality.
    -Bug Fix: Interfacing - Flat data interfaces no longer write log information to the maintenance task debug log.    -Bug Fix: Interfacing - Flat data interfaces no longer write log information to the maintenance task debug log.
Line 962: Line 1175:
 ===== Version 3.43.1| Date : 11/28/2017 ===== ===== Version 3.43.1| Date : 11/28/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171128_ReferralSources|Referral Sources - Added a new lookup table (AdditionalReferralSources) to allow for adding sources without adding locations into the GoRev location directory.]]+   -Change: - Added a new lookup table (AdditionalReferralSources) to allow for adding sources without adding locations into the GoRev location directory.
    -Feature: [[venture:change_log:20171128_Posting|Posting - Added a button to allow for clearing the current item in a batch.]]    -Feature: [[venture:change_log:20171128_Posting|Posting - Added a button to allow for clearing the current item in a batch.]]
-   -Feature[[venture:change_log:20171128_Clearinghouse|Clearinghouse - Added support for Trizetto claim acknowledgments ACK (.277) processing.]] +   -Change: Added support for Trizetto claim acknowledgments ACK (.277) processing.]] 
-   -Feature[[venture:change_log:20171128_StatCheckIn|Stat Check-in - Added the ability to force referring collection instead of attending via System Registry Settings.]]+   -Change: Added the ability to force referring collection instead of attending via System Registry Settings.
    -Bug Fix: Charge Master - The charge editor screen will now show the most recent price when first loaded instead of the oldest.    -Bug Fix: Charge Master - The charge editor screen will now show the most recent price when first loaded instead of the oldest.
    -Bug Fix: Posting - Posting will now include all other pending rows in the current batch that apply to the current Account in the balancing calculations.    -Bug Fix: Posting - Posting will now include all other pending rows in the current batch that apply to the current Account in the balancing calculations.
Line 971: Line 1184:
 ===== Version 3.43.0| Date : 11/21/2017 ===== ===== Version 3.43.0| Date : 11/21/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171121_Lab1|Lab - The upper limits options for results now apply to all result sections (screens, confirms, validities)]] +   -Change: The upper limits options for results now apply to all result sections (screens, confirms, validities) 
-   -Feature[[venture:change_log:20171121_Lab2|Lab - Result designs now support page numbers.]] +   -Change: Result designs now support page numbers. 
-   -Feature[[venture:change_log:20171121_Batching|Batching - Added the ability to bulk move cases to different coding statuses.]] +   -Change: Added the ability to bulk move cases to different coding statuses. 
-   -Feature[[venture:change_log:20171121_Posting1|Posting - Added a new system of checks and balances to help prevent posting errors.]] +   -Change: Added a new system of checks and balances to help prevent posting errors. 
-   -Feature[[venture:change_log:20171121_Posting2|Posting - Added support for an in-line calculator that can be used within any numeric field to calculate mathematical expressions. (ex: 217.10 + 2870 * 50%)]] +   -Change: Added support for an in-line calculator that can be used within any numeric field to calculate mathematical expressions. (ex: 217.10 + 2870 * 50%) 
-   -Feature[[venture:change_log:20171121_Clearinghouse|Clearinghouse - Added an additional clearinghouse layer within GoRev to allow for abstraction and supporting multiple clearing houses.]] +   -Change: Added an additional clearinghouse layer within GoRev to allow for abstraction and supporting multiple clearing houses. 
-   -Feature[[venture:change_log:20171121_Integration|Integration - Added support for Trizetto clearinghouse.]] +   -Change: Added support for Trizetto clearinghouse. 
-   -Feature[[venture:change_log:20171121_ClaimGeneration|Claim Generation - Added support for generating state reporting batches utilizing external account numbers instead of internal GoRev accounts for claim numbers.]]+   -Change: Added support for generating state reporting batches utilizing external account numbers instead of internal GoRev accounts for claim numbers.
    -Bug Fix: Charge Master - Fixed an issue causing the active field's value to not save correctly.    -Bug Fix: Charge Master - Fixed an issue causing the active field's value to not save correctly.
        
Line 994: Line 1207:
    -Feature: [[venture:change_log:20171106_Lab1|Lab - Result designs can now contain multiple logos.]]    -Feature: [[venture:change_log:20171106_Lab1|Lab - Result designs can now contain multiple logos.]]
    -Feature: [[venture:change_log:20171106_Lab2|Lab - Added the ability to link parent tests to child analytes.]]    -Feature: [[venture:change_log:20171106_Lab2|Lab - Added the ability to link parent tests to child analytes.]]
-   -Feature[[venture:change_log:20171106_EtherApiUpdater|EtherApiUpdater service underwent multiple improvements.]]+   -Change: EtherApiUpdater service underwent multiple improvements.
    -Bug Fix: Lab Quality Control - Added support for automatically splitting graphs with too many points into multiple graphs on a print out.    -Bug Fix: Lab Quality Control - Added support for automatically splitting graphs with too many points into multiple graphs on a print out.
    -Bug Fix: Lab Order - The prescribed medications area now resizes correctly.    -Bug Fix: Lab Order - The prescribed medications area now resizes correctly.
Line 1001: Line 1214:
        
 == API and Administration == == API and Administration ==
-   -Feature[[venture:change_log:20171106_Interfacing1|Interfacing - Added insert only support to all flat data interfaces.]] +   -Change: Added insert only support to all flat data interfaces. 
-   -Feature[[venture:change_log:20171106_Interfacing2|Interfacing - Added in functionality to protect configurable coding statuses from changes.]]+   -Change: Added in functionality to protect configurable coding statuses from changes.]]
    -Feature: [[venture:change_log:20171106_Interfacing3|Interfacing - Added the ability to disable a list of event types for HL7 interfaces.]]    -Feature: [[venture:change_log:20171106_Interfacing3|Interfacing - Added the ability to disable a list of event types for HL7 interfaces.]]
    -Feature: [[venture:change_log:20171106_Interfacing4|Interfacing - Added configurable filename formatting to Report Exporter interface based on the 'FileNameFormat' setting.]]    -Feature: [[venture:change_log:20171106_Interfacing4|Interfacing - Added configurable filename formatting to Report Exporter interface based on the 'FileNameFormat' setting.]]
Line 1026: Line 1239:
 == API and Administration == == API and Administration ==
    -Feature: [[venture:change_log:20171030_HL7|HL7 - Added a new filter (ExcludeServicetypes) to outbound HL7 interfaces.]]    -Feature: [[venture:change_log:20171030_HL7|HL7 - Added a new filter (ExcludeServicetypes) to outbound HL7 interfaces.]]
-   -Feature[[venture:change_log:20171030_GoRevCloud|GoRev Cloud - Added support for the GoRev Cloud Gateway to the EtherApiUpdater and GoRevUpdateTracker applications.]]+   -Change: Added support for the GoRev Cloud Gateway to the EtherApiUpdater and GoRevUpdateTracker applications.
  
 ===== Version 3.41.2| Date : 10/26/2017 ===== ===== Version 3.41.2| Date : 10/26/2017 =====
Line 1039: Line 1252:
 ===== Version 3.41.1| Date : 10/25/2017 ===== ===== Version 3.41.1| Date : 10/25/2017 =====
 == GoRev == == GoRev ==
-   -Feature[[venture:change_log:20171025_LabQualityControl|Lab Quality Control - Added the ability to isolate materials to specific instruments.  This helps prevent accidental approvals into the wrong material lot.]] +   -Change: Added the ability to isolate materials to specific instruments.  This helps prevent accidental approvals into the wrong material lot. 
-   -Feature[[venture:change_log:20171025_Lab|Lab - Added a new table to track laboratory directors over time as well as a field to manually trigger regeneration of result PDFs.]]+   -Change: Added a new table to track laboratory directors over time as well as a field to manually trigger regeneration of result PDFs.
    -Bug Fix: Lab - Searching for prescriptions no longer brings back duplicate results due to multiple root names.    -Bug Fix: Lab - Searching for prescriptions no longer brings back duplicate results due to multiple root names.
    -Bug Fix: Home - GoRev will no longer immediately crash if there is a Location data model conflict between the Client and Server.    -Bug Fix: Home - GoRev will no longer immediately crash if there is a Location data model conflict between the Client and Server.
Line 1054: Line 1267:
  
 == API and Administration == == API and Administration ==
-   -Feature[[venture:change_log:20171023_GoRevCloud|GoRev Cloud - Added 3 new GCG GetServer methods that are available anonymously to resolve server information.]]+   -Change: Added 3 new GCG GetServer methods that are available anonymously to resolve server information.
  
 ===== Version 3.40.5 | Date : 10/17/2017 ===== ===== Version 3.40.5 | Date : 10/17/2017 =====
Line 1065: Line 1278:
  
 == API and Administration == == API and Administration ==
-   -Feature[[venture:change_log:20171017_Users3|Users - The user maintenance will now validate emails/phones and flag the account for an update if validation fails.]]+   -Change: The user maintenance will now validate emails/phones and flag the account for an update if validation fails.
    -Feature: [[venture:change_log:20171017_Users4|Users - New update password dialog created instead of reusing first time login.]]    -Feature: [[venture:change_log:20171017_Users4|Users - New update password dialog created instead of reusing first time login.]]
    -Changes: Users - Profile Form, Phone and Email validation has been added to the profile form as well as an option to choose contact method as well as various cosmetic changes and bug fixes.    -Changes: Users - Profile Form, Phone and Email validation has been added to the profile form as well as an option to choose contact method as well as various cosmetic changes and bug fixes.
Line 1075: Line 1288:
  
 == API and Administration == == API and Administration ==
-   -Feature[[venture:change_log:20171016_Lab1|Lab - Added in a maintenance task to automatically trim erroneous white space surrounding prescription and root names in the MedMaster system table.]] +   -Change: Added in a maintenance task to automatically trim erroneous white space surrounding prescription and root names in the MedMaster system table. 
-   -Feature[[venture:change_log:20171016_Lab2|Lab - Added in a new TargetLynx QLD result import process for integrating with Waters analyzers.]]+   -Change: Added in a new TargetLynx QLD result import process for integrating with Waters analyzers.
    -Bug Fix: Users - Enabling an account via the web portal now correctly sets last login so that maintenance will not disable the user before they have a chance to login.    -Bug Fix: Users - Enabling an account via the web portal now correctly sets last login so that maintenance will not disable the user before they have a chance to login.
  
Line 1086: Line 1299:
  
 == API and Administration == == API and Administration ==
-   -Feature[[venture:change_log:20171012_Server|Server - Added Linux server support to the EtherApiServiceGuardian and re-implement it across all servers.]]+   -Change: Added Linux server support to the EtherApiServiceGuardian and re-implement it across all servers.
    -Bug Fix: Interfacing - Fixed an issue with the Carrier Subscriber interface that causes the interface to fail when recording statistics.    -Bug Fix: Interfacing - Fixed an issue with the Carrier Subscriber interface that causes the interface to fail when recording statistics.
  
Line 1093: Line 1306:
    -Feature: [[venture:change_log:20171011_Users1|Users - Users will now be emailed or sms'd a warning that their account is about to be automatically disabled with a link to refresh their account.]]    -Feature: [[venture:change_log:20171011_Users1|Users - Users will now be emailed or sms'd a warning that their account is about to be automatically disabled with a link to refresh their account.]]
    -Feature: [[venture:change_log:20171011_Users2|Users - Added Terminate field to users and swapped it in for Disable on users form]]    -Feature: [[venture:change_log:20171011_Users2|Users - Added Terminate field to users and swapped it in for Disable on users form]]
-   -Feature[[venture:change_log:20171011_Interfacing1|Interfacing - Added a new DFT outbound HL7 interface type.]]+   -Change: Added a new DFT outbound HL7 interface type.
    -Bug Fix: Lab - Fixed an issue causing designs to duplicate on save in the Result Designer.    -Bug Fix: Lab - Fixed an issue causing designs to duplicate on save in the Result Designer.
  
 == API and Administration == == API and Administration ==
    -Feature: [[venture:change_log:20171011_Lab|Lab - Result Generation, Added an option 'HidePrescriptions' in the result designer to not display rx items in confirms.]]    -Feature: [[venture:change_log:20171011_Lab|Lab - Result Generation, Added an option 'HidePrescriptions' in the result designer to not display rx items in confirms.]]
-   -Feature[[venture:change_log:20171011_Interfacing2|Interfacing - Added a new maintenance task to automatically generate ADT Register events on accounts that have not sent events yet.]] +   -Change: Added a new maintenance task to automatically generate ADT Register events on accounts that have not sent events yet. 
-   -Feature[[venture:change_log:20171011_Users3|Users - Users can no longer reset their password or request that their account be re-enabled if they are 'terminated']]+   -Change: Users can no longer reset their password or request that their account be re-enabled if they are 'terminated'
    -Bug Fix: Interfacing - Restructured the HL7 event filtering settings to function properly across all event types.    -Bug Fix: Interfacing - Restructured the HL7 event filtering settings to function properly across all event types.
    -Bug Fix: Interfacing - Fixed an issue causing MRNPrefix and VisitIDPrefix settings to not retain their value.    -Bug Fix: Interfacing - Fixed an issue causing MRNPrefix and VisitIDPrefix settings to not retain their value.
QR Code
QR Code public:gorev:changelog (generated for current page)