No ACL setup yet! Denying access to everyone.

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
public:gorev:posting [2019/11/15 11:57]
richie.pottier [Other Features]
public:gorev:posting [2020/06/02 00:49] (current)
sean.blythe
Line 3: Line 3:
  
 This page will describe the posting module and procedures.  There are two methods to post transactions.  One, create a manual batch and enter each transaction one at a time.  Two, upload an X12 835 file and the system will auto create each transaction in the batch.   This page will describe the posting module and procedures.  There are two methods to post transactions.  One, create a manual batch and enter each transaction one at a time.  Two, upload an X12 835 file and the system will auto create each transaction in the batch.  
 +
 +**Note:** If you need assistance with a particular portion of this tutorial, please use the **Table of Contents** on the left hand side of this screen to navigate to the topic that you require. 
  
 ===== Post a Manual Batch ===== ===== Post a Manual Batch =====
  
-Click the Posting {{:public:gorev:posting.png?200|}} icon on the main screen and the below window will appear.+{{:public:gorev:bulk_posting_1.png|}} 
 + 
 +Select the Billing Modules on the top ribbon of the GoRev home page and then select the Bulk Posting button. 
 + 
 +{{:public:gorev:bulk_posting_2.png|}} 
  
-{{:public:gorev:postingoverview.png|}}+To start posting you must first create a new batch via the New Batch button on the top ribbon and enter in your posting totals (Noteif you do not know your totals simply enter in zeros and when saving select **Expected Amounts are Incorrect**) or If you have posting within the posting screen from a previous non saved batch this will automatically populate the last auto-saved batch from your local computer.
  
-The system will automatically either **A)** start a new batch for you, or **B)** re-open the last auto-saved batch from your local computer.+**Note: Once a new Batch is created you will then be able to select the facility from the dropdown within the Current Entry section and begin posting**
  
-In the **Current Record** bar on the right, enter in an a facility and a corresponding account number.  The system will automatically populate a drop down.  Select the account you wish to post to from this list.   Next, select the payer this payment is coming from or select "Patient Payment" if the payment is from the guarantor.  The easiest way to do this is by clicking in the Payer box.  The system will show you what payers are associated with this specific patient account.  Simply double click or press enter to select one.  Depending which **Payer** you select, the next step will vary slightly. +In the **Current Entry** section on the right, enter in the facility and a corresponding account number.  The system will automatically populate a dropdown.  Select the vist/Date of Service you wish to post to from this list.   Next, select the payer the payment is coming from or select "Patient Payment" if the payment is from the guarantor.  The easiest way to do this is by clicking in the Payer box.  The system will show you what payers are associated with this specific patient account.  Simply double click or press enter to select one.  Depending on which **Payer** you select, the next step will vary slightly. 
  
 ===== Insurance Payers ===== ===== Insurance Payers =====
  
-Start by filling out **Payment Amount** (actual cash amount received), **Copay**, **In-Network Remaining Deductible**, **Co-insurance %**, and **Out of Pocket Max Remaining**.+Start by filling out **Payment Amount** (actual cash amount received), **Copay**, **Deductible**, and **Co-insurance**.
  
 If you are not final adjusting the account due to a secondary payer, denial, or other extended circumstance, you may opt to disable the **Auto Adjust** feature.  Unchecking this box will allow you to manually edit the adjustment being posted to the account. If you are not final adjusting the account due to a secondary payer, denial, or other extended circumstance, you may opt to disable the **Auto Adjust** feature.  Unchecking this box will allow you to manually edit the adjustment being posted to the account.
Line 22: Line 29:
 Your form should look like the below: Your form should look like the below:
  
-{{:public:gorev:posting3_1.png|}}+{{:public:gorev:bulk_posting_3.png|}}
  
 Please note, **denials** can be posted by leaving all fields as 0.00.  Similarly, you can post an adjustment by disabling **Auto Adjust** and populating just this field and leaving all others as 0.00. Please note, **denials** can be posted by leaving all fields as 0.00.  Similarly, you can post an adjustment by disabling **Auto Adjust** and populating just this field and leaving all others as 0.00.
 +
 +Color-Coded required fields
 +The required fields within the Bulk Posting screen  that require a value are Facility, Account number
 +Payer, Payment Amount and Adjustment. There must be a value in all of these fields or you can not save. 
 +If all required fields have a value the Posting field line will populate in green. If any of these fields are missing it will populate in red
 +
 +{{:public:gorev:bulk_posting_4.png|}}
 +
 +The first line has all required fields so it is Green, the second line is missing the payer so it is in red
  
 ===== Self/Cash Pay ===== ===== Self/Cash Pay =====
Line 34: Line 50:
 An example is below. An example is below.
  
-{{:go:posting3.png?nolink|}}+{{:public:gorev:bulk_posting_5.png|}} 
 + 
 + 
  
 ===== Finalizing a Row ===== ===== Finalizing a Row =====
Line 42: Line 61:
 **A)** Click Add row to start the next transaction.  You can always return to a previous transaction by clicking on it in the grid to the left. **A)** Click Add row to start the next transaction.  You can always return to a previous transaction by clicking on it in the grid to the left.
  
-**B)** Once you get down to the **Note** box in the **Current Record** box, you can leave a comment on the transaction and simply press enter to automatically start the next row and begin again. The **Account Number** field will be automatically selected.+{{:public:gorev:bulk_posting_6.png|}} 
 + 
 +**B)** Once you get down to the **Note** box in the **Current Entry** section, you can leave a comment on the transaction and simply press enter to automatically start the next row and begin again. The **Account Number** field will be automatically selected. 
  
-{{:public:gorev:postingoptionsbaraddrow.png|}} 
  
 ===Finalizing the Batch=== ===Finalizing the Batch===
Line 50: Line 71:
 When you are done entering all transactions click Save and the below window will appear.  Please ensure you name your batch appropriately so you can search for it later if needed.  Best practice is to name it as Carrier Name + Check Number.   Also, it is very important you Click the Browse button and upload the image of the EOB.  This will save the actual check images to every patient account within your batch. When you are done entering all transactions click Save and the below window will appear.  Please ensure you name your batch appropriately so you can search for it later if needed.  Best practice is to name it as Carrier Name + Check Number.   Also, it is very important you Click the Browse button and upload the image of the EOB.  This will save the actual check images to every patient account within your batch.
  
-{{:public:gorev:postingsavebatch.png|}}+{{:public:gorev:bulk_posting_7.png|}}
  
 Check Finalize Batch if you are ready to permanently save the batch.  Do not check if you just want to temporarily save in order to come back and finish later. Check Finalize Batch if you are ready to permanently save the batch.  Do not check if you just want to temporarily save in order to come back and finish later.
Line 63: Line 84:
 Once you click open all the transactions in the 835 will auto populate into the batch as shown below. Once you click open all the transactions in the 835 will auto populate into the batch as shown below.
  
-{{:public:gorev:posting835.png|}}+{{:public:gorev:bulk_posting_8.png|}}}
  
-You will now need to click on each line and validate the numbers as well as go through any patient responsibility posting.  Not all 835 files from payers are accurate so you should be sure to validate each line.+You will now need to click on each line and validate the numbers as well as go through any patient responsibility posting.  **Not all 835 files from payers are accurate so you should be sure to validate each line.**
  
-When you are done entering all transactions click Save and the below window will appear.  Please ensure you name your batch appropriately so you can search for it later if needed.  Best practice is to name it as Carrier Name + Check Number.   Also, it is very important you Click the Browse button and upload the image of the EOB.  This will save the actual check images to every patient account within your batch.+When you are done entering all transactions click Save and the below window will appear.  Please ensure you name your batch appropriately so you can search for it later if needed.  Best practice is to name it as Carrier Name + Check Number and total of the check.   Also, it is very important you Click the Browse button and upload the image of the EOB.  This will save the actual EOB/check images to every patient account within your batch.
  
-{{:public:gorev:postingsavebatch.png|}}+{{:public:gorev:bulk_posting_9.png|}}
  
 Check Finalize Batch if you are ready to permanently save the batch.  Do not check if you just want to temporarily save in order to come back and finish later. Check Finalize Batch if you are ready to permanently save the batch.  Do not check if you just want to temporarily save in order to come back and finish later.
Line 80: Line 101:
 If you did not check finalize a batch will sit in a suspended status.  You can re-open batches by clicking the **Open Batch** button. If you did not check finalize a batch will sit in a suspended status.  You can re-open batches by clicking the **Open Batch** button.
  
-{{:public:gorev:postingopenbatchsearch.png|}}+{{:public:gorev:bulk_posting_10.png|}}
  
 Fill in any of the **Search Criteria** that you would like and double click an item in the grid to open it. Batches that have already been **Finalized** may be re-opened to view, but they cannot be modified. Fill in any of the **Search Criteria** that you would like and double click an item in the grid to open it. Batches that have already been **Finalized** may be re-opened to view, but they cannot be modified.
Line 87: Line 108:
  
  
-This functionality will allow you to track all outstanding remittance needing posting.   The workflow should be done as follows: +This functionality will allow you to track all outstanding remittances needing posting.   The workflow should be done as follows: 
-1.  Every morning you should add all new checks from Zirmed, Zpay, and Verafund individually to the posting workflow by clicking add item as shown below.   Be sure to attach the 835 or EOB if you have it.  If you do not have an 835 or EOB put the payment into waiting on documentation.  +1.  Every morning you should add all new checks from Zirmed or your ClearingHouse, Zpay, and Verafund individually to the posting workflow by clicking **Wokflow** and **Add**.   Be sure to attach the 835 or EOB if you have it.  If you do not have an 835 or EOB put the payment into waiting on documentation.  
  
 +{{:public:gorev:bulk_posting_11.png|}}
  
 When you are actively posting a batch place it into "In Progress." When you are actively posting a batch place it into "In Progress."
  
-{{:public:gorev:postingadditem1.png|}}+
  
 2. All posting should now be done by clicking on the Posting Workflow button and working through the batches listed here.   2. All posting should now be done by clicking on the Posting Workflow button and working through the batches listed here.  
  
  
-{{:public:gorev:postingworkflow1.png|}}+{{:public:gorev:bulk_posting_12.png|}}
  
  
Line 106: Line 128:
 Two other very useful features exist within the posting module.  As you are entering lines you can delete a row instantly by clicking the "Delete Row" button: Two other very useful features exist within the posting module.  As you are entering lines you can delete a row instantly by clicking the "Delete Row" button:
  
-{{:public:gorev:delete.png|}}+{{:public:gorev:bulk_posting_13.png|}}
  
  
Line 112: Line 134:
 You can also pull up the patient overview screen and patient financials directly from posting for the patient specified in the transaction line you currently have selected. You can also pull up the patient overview screen and patient financials directly from posting for the patient specified in the transaction line you currently have selected.
  
-{{:venture:posting_guide.png?nolink&600|}}+{{:public:gorev:bulk_posting_14.png|}}
  
  
Line 118: Line 140:
 The posting screen can also link you directly to GoRev's advanced search function simply by clicking the Find Patient button on the top ribbon The posting screen can also link you directly to GoRev's advanced search function simply by clicking the Find Patient button on the top ribbon
  
-{{:venture:posting_advanced_search.png?nolink&600|}}+{{:public:gorev:bulk_posting_15.png|}}
  
  
 +
 +====== Additional Resources ======
 +
 +==== GoRev Support Team ====
 +
 +If you have any questions, concerns, or problems regarding the **GoRev Bulk Posting** module, please contact the **GoRev Support Team** by submitting an **IT Support Ticket**, by phone at **1-(317)-794-3900**, and/or by email at **[[ask@gorev.com|ask@gorev.com]]**. 
 +
 +**Note:** Always submit an **IT Support Ticket** detailing the problem that you are experiencing with this portion of GoRev, if possible, as this will give GoRev Support Agents access to information that will help expedite the resolution of your issue. 
 +
 +If you are not sure how to submit an **IT Support Ticket** in GoRev, please see the [[public:gorev:itsupportticketcreation|GoRev IT Support Ticket Creation Tutorial]] for assistance. 
  
 [[:public:GoRev:start|Back to GoRev Guides]] [[:public:GoRev:start|Back to GoRev Guides]]
 +
  
  
QR Code
QR Code public:gorev:posting (generated for current page)